Industry: Metal working
Cut 42 MT
Machining neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 42 MT
Machining neat cutting oil
This product has been formulated from selected paraffinic base oils fortified with specially stable additives. Does not contain chlorine or heavy metals.
Cut 61 A
Lapping and honing neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 61 A
Lapping and honing neat cutting oil
This product is a low viscosity oil specially formulated for finishing operations with a low tendency to oil mist.
Cut 62 A
Machining neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 62 A
Machining neat cutting oil
This product is light oil formulated from selected paraffinic base oils with additives with high chemical stability. It does not contain chlorine or heavy metals.
Cut ADE
Cutting fluid for manual operations
Metalworking Fluids
Metalworking Fluids
Cut ADE
Cutting fluid for manual operations
This product is a cutting fluid for direct application specially formulated for drilling, threading, reaming and severe machining of steel in severe working conditions. It contains EP additives that avoid welding of tool and part and built-up edge formation thanks to the anti-seize properties.
Cut BIO 10
Fully synthetic neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut BIO 10
Fully synthetic neat cutting oil
This product is a biodegradable and low viscosity synthetic oil of high chemical stability and low mist formation. It is specially formulated for sharpening and grinding operations. It is suitable for diamond and cubic boron nitride (CBN) grinding wheels.
Cut BIO A
Fully synthetic neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut BIO A
Fully synthetic neat cutting oil
This product is a synthetic oil of high chemical stability and good oxidation resistance. It is recommended for metal machining operations where performance is required and does not contain chlorine compounds and due to its nature the product is readily biodegradable.
Cut EL
Dielectric fluid
Metalworking Fluids
Metalworking Fluids
Cut EL
Dielectric fluid
This product is a low viscosity transparent oil designed for use in electro-discharge machines (EDM). It is formulated with highly refined paraffinic base stock and contains additives which improve dielectric strength and prevent oxidation.
Cut ELX
State-of-the-art synthetic dielectric fluid
Metalworking Fluids
Metalworking Fluids
Cut ELX
State-of-the-art synthetic dielectric fluid
This product is a low viscosity green transparent oil designed for use in electro-discharge machines (EDM). This product is formulated with a highly refined synthetic base stock and contains additives which improve dielectric strength and prevent oxidation.
Cut IM
Machining and broaching neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut IM
Machining and broaching neat cutting oil
This product is a mineral oil type active cutting fluid formulated from selected stable additives. The balanced additives (extreme pressure and polar compounds) maximizes performance over the wide range of pressures and temperatures encountered when machining difficult metals and difficult conditions. It provides the essential lubricating properties required to reduce the several loads imparted to
D-MAX GO20
D-MAX GO20 is a dispersion of colloidal, synthetic graphite in refined mineral oil
Dispersions
Dispersions
D-MAX GO20
D-MAX GO20 is a dispersion of colloidal, synthetic graphite in refined mineral oil
A dispersion of colloidal graphite dispersed in SN 500 base oil.
D-MAX GO30 68
Graphite in oil dispersion
Dispersions
Dispersions
D-MAX GO30 68
Graphite in oil dispersion
This product is a dispersion of colloidal, synthetic graphite in refined mineral oil. Compared to other Matrix dispersions, the graphite is suspended in a lower viscosity oil to improve flow and pumping properties.
D-MAX GO40 XF
Colloidal dispersion of super fine graphite in mineral oil
Dispersions
Dispersions
D-MAX GO40 XF
Colloidal dispersion of super fine graphite in mineral oil
This product is a colloidal dispersion of super fine graphite in mineral oil. The product may be directly employed “as is” or it may be used as a lubricant additive.
D-MAX GSDL
Graphite dry film
Dispersions
Dispersions
D-MAX GSDL
Graphite dry film
This product is a multi-purpose product based on a dispersion of fine particle graphite and a synthetic resin bonding agent combined with a fast drying solvent. The product is in a liquid form and can be applied by brush or spray, once applied GSDL will quickly dry leaving a film of graphite securely adhered to
D-MAX GW 15
Stable dispersion of semi-colloidal graphite in water
Dispersions
Dispersions
D-MAX GW 15
Stable dispersion of semi-colloidal graphite in water
This product is a water-based suspension of synthetic graphite. Contains components and additives which improve the film adhesion on used tools.
D-MAX GW ASD
New generation anode stub coating for primary aluminium smelters
Dispersions
Dispersions
D-MAX GW ASD
New generation anode stub coating for primary aluminium smelters
This product is a water based suspension of synthetic graphite. Contains components and additives which improve the film adhesion on used tools.
D-MAX GW ASR25
New generation anode stub coating for primary aluminium smelters with enhanced electrical and thermal conductivity
Dispersions
Dispersions
D-MAX GW ASR25
New generation anode stub coating for primary aluminium smelters with enhanced electrical and thermal conductivity
This product is a water based suspension of synthetic graphite. Contains components and additives which improve the film adhesion on used tools.
D-MAX MO20
Dispersion of colloidal molybdenum disulphide in mineral oil
Dispersions
Dispersions
D-MAX MO20
Dispersion of colloidal molybdenum disulphide in mineral oil
This product is designed for use as an additive in the formulation of lubricating oils and greases containing MoS2.
D-MAX MO8
Dispersion of colloidal molybdenum disulphide in mineral oil
Dispersions
Dispersions
D-MAX MO8
Dispersion of colloidal molybdenum disulphide in mineral oil
This product is designed for use as an additive in the formulation of lubricating oils and greases containing MoS2.
D-MAX MSDL
Moly dry film
Dispersions
Dispersions
D-MAX MSDL
Moly dry film
This product is a fast drying, resin bonded, lubricating coating containing Molybdenum Disulphide (MoS2) which lubricates and protects components from seizure and wear.
D-MAX PTFE 15 FG
Food grade PTFE dispersion
Dispersions
Dispersions
D-MAX PTFE 15 FG
Food grade PTFE dispersion
This product is a stable and uniform 15% polytetrafluoroethylene (PTFE) dispersion in polyalphaolefin (PAO) oil. This additive assures good wetting and offers an alternative to the handling of powders.
D-MAX PTFE20
Highly stable PTFE concentrated dispersion
Dispersions
Dispersions
D-MAX PTFE20
Highly stable PTFE concentrated dispersion
This product is a concentrated dispersion of polytetrafluroethylene (PTFE) in refined mineral oil with excellent suspension stability. Due to the exclusive particle selection as well as the special production process we were able to create a very high stability in the dispersions specially compared to similar products.
D-MAX X3
Multifunctional lubricant using ceramic technology
Dispersions
Dispersions
D-MAX X3
Multifunctional lubricant using ceramic technology
A multifunctional lubricant for demanding conditions. It utilizes a blend of synthetic fluids to transport a synergistic blend of ceramic (hBn) reinforced PTFE to critical bearing surfaces protecting them from wear and corrosion. This advanced technology produces an extreme performance lubricant and its cost effectiveness results in saving time and money by extending lubrication intervals.
FDX 100 ACA
Synthetic forming fluid
Metalworking Fluids
Metalworking Fluids
FDX 100 ACA
Synthetic forming fluid
This product is a synthetic low viscosity water based evaporable fluid for forming applications. It is suitable for stamping, drawing of aluminium, steel, stainless steel strips and parts. The fluid is free of oils, solvents, silicones and chlorine and leaves a very thin film on the part that is compatible with paints, electroplating and welding.
FDX 1001 AM
Evaporable stamping and forming oil
Metalworking Fluids
Metalworking Fluids
FDX 1001 AM
Evaporable stamping and forming oil
This product is a low viscosity evaporating oil specially formulated for stamping and forming applications. It contains polar compounds to achieve most effective operations. It evaporates leaving very small amounts of residues, therefore degreasing of parts is not necessary.
