Category: Metalworking Fluids
Cut 14
Broaching neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 14
Broaching neat cutting oil
This product is a cutting oil with good cooling properties and high film resistance that avoids welding part-tool. It has a very balanced formulation suitable for severe machining operations. This is an active oil so it cannot be used with copper and its alloys.
Cut 14 AT
High performance neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 14 AT
High performance neat cutting oil
This product is a light mineral oil type cutting fluid formulated from selected paraffinic oils fortified with stable additives that gives high performance in machining operations. Does not contain chlorine or heavy metals.
Cut 148
Machining neat cutting oil free from chlorine and heavy metals
Metalworking Fluids
Metalworking Fluids
Cut 148
Machining neat cutting oil free from chlorine and heavy metals
This product has been formulated from selected paraffinic base oils fortified with specially stable additives. This is a non-active cutting oil that maximizes performance over the wide range of pressures and temperatures encountered when machining under difficult conditions. Does not contain chlorine or heavy metals.
Cut 154 M
Machining neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 154 M
Machining neat cutting oil
This product has been formulated from selected paraffinic base oils and carefully selected stable additives (EP and polar compounds). It provides the essential lubricating properties required to reduce the several loads imparted to the cutting edge, when cutting tough materials. It does not contain chlorine or heavy metals.
Cut 16
Gun-drilling neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 16
Gun-drilling neat cutting oil
This product is a cutting oil with good cooling properties and high film resistance that avoids welding part/tool. It is formulated from paraffinic base stocks with selected additives. This product is an active oil so it cannot be used with copper and its alloys.
Cut 16 P
General machining neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 16 P
General machining neat cutting oil
This product is a light transparent cutting oil with good cooling properties. Formulated with solvent refined mineral oil and carefully selected polar and chlorine compounds that avoids welding part-tool, provides superior surface finish, extended tool life and good machine maintenance.
Cut 160
Environmentally friendly machining neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 160
Environmentally friendly machining neat cutting oil
This product is a mineral oil type active cutting fluid formulated from selected stable additives. The balanced additives maximizes performance over the wide range of pressures and temperatures encountered when machining difficult metals and difficult conditions. It provides the essential lubricating properties required to reduce the several loads imparted to the cutting edge, when cutting
Cut 20
Machining neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 20
Machining neat cutting oil
This product is a light cutting oil with good cooling properties formulated from paraffinic base stock and selected additives. It contains polar and sulphur-chlorine compounds that avoids welding part/tool, provides superior surface finish, extended tool life and good machine maintenance.
Cut 22 M
Multifunctional Cutting Fluid
Metalworking Fluids
Metalworking Fluids
Cut 22 M
Multifunctional Cutting Fluid
This product has been formulated from hydro treated base oils fortified with specially EP additives. It does not contain chlorine or heavy metals.
Cut 42 MT
Machining neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 42 MT
Machining neat cutting oil
This product has been formulated from selected paraffinic base oils fortified with specially stable additives. Does not contain chlorine or heavy metals.
Cut 61 A
Lapping and honing neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 61 A
Lapping and honing neat cutting oil
This product is a low viscosity oil specially formulated for finishing operations with a low tendency to oil mist.
Cut 62 A
Machining neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 62 A
Machining neat cutting oil
This product is light oil formulated from selected paraffinic base oils with additives with high chemical stability. It does not contain chlorine or heavy metals.
Cut ADE
Cutting fluid for manual operations
Metalworking Fluids
Metalworking Fluids
Cut ADE
Cutting fluid for manual operations
This product is a cutting fluid for direct application specially formulated for drilling, threading, reaming and severe machining of steel in severe working conditions. It contains EP additives that avoid welding of tool and part and built-up edge formation thanks to the anti-seize properties.
Cut BIO 10
Fully synthetic neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut BIO 10
Fully synthetic neat cutting oil
This product is a biodegradable and low viscosity synthetic oil of high chemical stability and low mist formation. It is specially formulated for sharpening and grinding operations. It is suitable for diamond and cubic boron nitride (CBN) grinding wheels.
Cut BIO A
Fully synthetic neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut BIO A
Fully synthetic neat cutting oil
This product is a synthetic oil of high chemical stability and good oxidation resistance. It is recommended for metal machining operations where performance is required and does not contain chlorine compounds and due to its nature the product is readily biodegradable.
Cut EL
Dielectric fluid
Metalworking Fluids
Metalworking Fluids
Cut EL
Dielectric fluid
This product is a low viscosity transparent oil designed for use in electro-discharge machines (EDM). It is formulated with highly refined paraffinic base stock and contains additives which improve dielectric strength and prevent oxidation.
Cut ELX
State-of-the-art synthetic dielectric fluid
Metalworking Fluids
Metalworking Fluids
Cut ELX
State-of-the-art synthetic dielectric fluid
This product is a low viscosity green transparent oil designed for use in electro-discharge machines (EDM). This product is formulated with a highly refined synthetic base stock and contains additives which improve dielectric strength and prevent oxidation.
Cut IM
Machining and broaching neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut IM
Machining and broaching neat cutting oil
This product is a mineral oil type active cutting fluid formulated from selected stable additives. The balanced additives (extreme pressure and polar compounds) maximizes performance over the wide range of pressures and temperatures encountered when machining difficult metals and difficult conditions. It provides the essential lubricating properties required to reduce the several loads imparted to
FDX 100 ACA
Synthetic forming fluid
Metalworking Fluids
Metalworking Fluids
FDX 100 ACA
Synthetic forming fluid
This product is a synthetic low viscosity water based evaporable fluid for forming applications. It is suitable for stamping, drawing of aluminium, steel, stainless steel strips and parts. The fluid is free of oils, solvents, silicones and chlorine and leaves a very thin film on the part that is compatible with paints, electroplating and welding.
FDX 1001 AM
Evaporable stamping and forming oil
Metalworking Fluids
Metalworking Fluids
FDX 1001 AM
Evaporable stamping and forming oil
This product is a low viscosity evaporating oil specially formulated for stamping and forming applications. It contains polar compounds to achieve most effective operations. It evaporates leaving very small amounts of residues, therefore degreasing of parts is not necessary.
FDX 1030 CU
Tube drawing oil
Metalworking Fluids
Metalworking Fluids
FDX 1030 CU
Tube drawing oil
This product is a neat oil specially formulated for tube drawing and forming applications of copper, bronze and aluminium. Product has very good lubricity and does not leave residues after annealing treatments.
FDX 11
Stamping and forming fluid
Metalworking Fluids
Metalworking Fluids
FDX 11
Stamping and forming fluid
This product is an evaporating fluid with a low viscosity specially formulated for stamping and forming applications. The main advantage is that parts do not need to be degreased thanks to very little residue. It does not contain chlorine compounds.
FDX 12
Stamping and forming fluid
Metalworking Fluids
Metalworking Fluids
FDX 12
Stamping and forming fluid
This product is an evaporating oil with a low viscosity specially formulated for stamping and forming applications. The main advantage of this product is that parts do not need to be degreased. There is very little residue left on the parts and that will evaporate within a short period of time.
FDX 172
Stamping and forming fluid
Metalworking Fluids
Metalworking Fluids
FDX 172
Stamping and forming fluid
This product is a premium oil specially formulated for stamping and forming applications. It has a combination of E.P. additives to achieve better performance and finishing. It contains polar compounds to achieve most effective operations and better productivity.
