Matrix Specialty Lubricants product assortment
Looking for products?
At our company, we are dedicated to providing the most advanced and effective lubricant solutions for all of our clients. We strive to stay at the forefront of technological advancements in our industry and are committed to offering the highest quality products. Should you have any specific product-related questions or are in search of a specific lubricant that is not listed on our website, please do not hesitate to reach out to us. We welcome any challenges and are dedicated to finding the best lubricant solution for your needs.
Cut 14 AT
High performance neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 14 AT
High performance neat cutting oil
This product is a light mineral oil type cutting fluid formulated from selected paraffinic oils fortified with stable additives that gives high performance in machining operations. Does not contain chlorine or heavy metals.
Cut 148
Machining neat cutting oil free from chlorine and heavy metals
Metalworking Fluids
Metalworking Fluids
Cut 148
Machining neat cutting oil free from chlorine and heavy metals
This product has been formulated from selected paraffinic base oils fortified with specially stable additives. This is a non-active cutting oil that maximizes performance over the wide range of pressures and temperatures encountered when machining under difficult conditions. Does not contain chlorine or heavy metals.
Cut 154 M
Machining neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 154 M
Machining neat cutting oil
This product has been formulated from selected paraffinic base oils and carefully selected stable additives (EP and polar compounds). It provides the essential lubricating properties required to reduce the several loads imparted to the cutting edge, when cutting tough materials. It does not contain chlorine or heavy metals.
Cut 16
Gun-drilling neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 16
Gun-drilling neat cutting oil
This product is a cutting oil with good cooling properties and high film resistance that avoids welding part/tool. It is formulated from paraffinic base stocks with selected additives. This product is an active oil so it cannot be used with copper and its alloys.
Cut 16 P
General machining neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 16 P
General machining neat cutting oil
This product is a light transparent cutting oil with good cooling properties. Formulated with solvent refined mineral oil and carefully selected polar and chlorine compounds that avoids welding part-tool, provides superior surface finish, extended tool life and good machine maintenance.
Cut 160
Environmentally friendly machining neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 160
Environmentally friendly machining neat cutting oil
This product is a mineral oil type active cutting fluid formulated from selected stable additives. The balanced additives maximizes performance over the wide range of pressures and temperatures encountered when machining difficult metals and difficult conditions. It provides the essential lubricating properties required to reduce the several loads imparted to the cutting edge, when cutting
Cut 20
Machining neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 20
Machining neat cutting oil
This product is a light cutting oil with good cooling properties formulated from paraffinic base stock and selected additives. It contains polar and sulphur-chlorine compounds that avoids welding part/tool, provides superior surface finish, extended tool life and good machine maintenance.
Cut 22 M
Multifunctional Cutting Fluid
Metalworking Fluids
Metalworking Fluids
Cut 22 M
Multifunctional Cutting Fluid
This product has been formulated from hydro treated base oils fortified with specially EP additives. It does not contain chlorine or heavy metals.
Cut 42 MT
Machining neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 42 MT
Machining neat cutting oil
This product has been formulated from selected paraffinic base oils fortified with specially stable additives. Does not contain chlorine or heavy metals.
Cut 61 A
Lapping and honing neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 61 A
Lapping and honing neat cutting oil
This product is a low viscosity oil specially formulated for finishing operations with a low tendency to oil mist.
Cut 62 A
Machining neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut 62 A
Machining neat cutting oil
This product is light oil formulated from selected paraffinic base oils with additives with high chemical stability. It does not contain chlorine or heavy metals.
Cut ADE
Cutting fluid for manual operations
Metalworking Fluids
Metalworking Fluids
Cut ADE
Cutting fluid for manual operations
This product is a cutting fluid for direct application specially formulated for drilling, threading, reaming and severe machining of steel in severe working conditions. It contains EP additives that avoid welding of tool and part and built-up edge formation thanks to the anti-seize properties.
Cut BIO 10
Fully synthetic neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut BIO 10
Fully synthetic neat cutting oil
This product is a biodegradable and low viscosity synthetic oil of high chemical stability and low mist formation. It is specially formulated for sharpening and grinding operations. It is suitable for diamond and cubic boron nitride (CBN) grinding wheels.
Cut BIO A
Fully synthetic neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut BIO A
Fully synthetic neat cutting oil
This product is a synthetic oil of high chemical stability and good oxidation resistance. It is recommended for metal machining operations where performance is required and does not contain chlorine compounds and due to its nature the product is readily biodegradable.
Cut EL
Dielectric fluid
Metalworking Fluids
Metalworking Fluids
Cut EL
Dielectric fluid
This product is a low viscosity transparent oil designed for use in electro-discharge machines (EDM). It is formulated with highly refined paraffinic base stock and contains additives which improve dielectric strength and prevent oxidation.
Cut ELX
State-of-the-art synthetic dielectric fluid
Metalworking Fluids
Metalworking Fluids
Cut ELX
State-of-the-art synthetic dielectric fluid
This product is a low viscosity green transparent oil designed for use in electro-discharge machines (EDM). This product is formulated with a highly refined synthetic base stock and contains additives which improve dielectric strength and prevent oxidation.
Cut IM
Machining and broaching neat cutting oil
Metalworking Fluids
Metalworking Fluids
Cut IM
Machining and broaching neat cutting oil
This product is a mineral oil type active cutting fluid formulated from selected stable additives. The balanced additives (extreme pressure and polar compounds) maximizes performance over the wide range of pressures and temperatures encountered when machining difficult metals and difficult conditions. It provides the essential lubricating properties required to reduce the several loads imparted to
D-MAX GO20
D-MAX GO20 is a dispersion of colloidal, synthetic graphite in refined mineral oil
Dispersions
Dispersions
D-MAX GO20
D-MAX GO20 is a dispersion of colloidal, synthetic graphite in refined mineral oil
A dispersion of colloidal graphite dispersed in SN 500 base oil.
D-MAX GO30 68
Graphite in oil dispersion
Dispersions
Dispersions
D-MAX GO30 68
Graphite in oil dispersion
This product is a dispersion of colloidal, synthetic graphite in refined mineral oil. Compared to other Matrix dispersions, the graphite is suspended in a lower viscosity oil to improve flow and pumping properties.
D-MAX GO40 XF
Colloidal dispersion of super fine graphite in mineral oil
Dispersions
Dispersions
D-MAX GO40 XF
Colloidal dispersion of super fine graphite in mineral oil
This product is a colloidal dispersion of super fine graphite in mineral oil. The product may be directly employed “as is” or it may be used as a lubricant additive.
D-MAX GSDL
Graphite dry film
Dispersions
Dispersions
D-MAX GSDL
Graphite dry film
This product is a multi-purpose product based on a dispersion of fine particle graphite and a synthetic resin bonding agent combined with a fast drying solvent. The product is in a liquid form and can be applied by brush or spray, once applied GSDL will quickly dry leaving a film of graphite securely adhered to
D-MAX GW 15
Stable dispersion of semi-colloidal graphite in water
Dispersions
Dispersions
D-MAX GW 15
Stable dispersion of semi-colloidal graphite in water
This product is a water-based suspension of synthetic graphite. Contains components and additives which improve the film adhesion on used tools.
D-MAX GW ASD
New generation anode stub coating for primary aluminium smelters
Dispersions
Dispersions
D-MAX GW ASD
New generation anode stub coating for primary aluminium smelters
This product is a water based suspension of synthetic graphite. Contains components and additives which improve the film adhesion on used tools.
D-MAX GW ASR25
New generation anode stub coating for primary aluminium smelters with enhanced electrical and thermal conductivity
Dispersions
Dispersions
D-MAX GW ASR25
New generation anode stub coating for primary aluminium smelters with enhanced electrical and thermal conductivity
This product is a water based suspension of synthetic graphite. Contains components and additives which improve the film adhesion on used tools.
