Contact

Contact

Products
< Back to products
Performance CP #63 | Spraycans

Copper Assembly Paste for High Temperature

Performance CP #63

267801301
Industrial copper assembly paste

This product forms an effective layer to separate metal surfaces at temperatures from –40°C to 900°C and up to 1200°C for short periods, the layer prevents the metal from seizing. The base oil in the paste is effective up to a temperature of 280°C and at temperatures above this level lubrication is obtained by the copper particles. These particles also provide optimum corrosion protection for parts which have been treated effectively.

Downloads

Download TDS Download SDS

Benefits

Key Benefits of High-Temperature Copper Assembly Paste
  • Directed jet spray
  • Dry coating
  • Eases assembly and dismantling
  • Guards against pick-up, galling and seizure
  • Helps prevent fretting corrosion
  • High thermal stability
  • Lowers force required during assembly
  • Prevents corrosion
  • Prevents friction, wear and sticking
  • Resistant to chemicals and weather influences
  • Simplifies the future removal
  • Suitable for use in arduous conditions
  • Wide range of applications

Segments

Performance CP #63 is designed to meet the demands of various industries, where reliability and performance are essential. Each sector has its own challenges, from strict regulations to specific operational requirements. Performance CP #63 ensures optimal operation, helping businesses improve efficiency and reduce downtime.

Explore the categories below to see how Performance CP #63 delivers tailored solutions for your needs, or visit our Segments page for a detailed overview.

Applications of Copper Paste for High-Load and Thermal Environments

Performance CP is used as an assembly paste for all types of screws, threads and press-fit connections. Long-term protection against pitting and seizing is provided because of the large amount of copper particles in the formulation. It is suitable for applications subjected to high thermal and mechanical loads, e.g. screw connections on exhaust systems, mounting fittings on turbochargers, press-fit connections for ship propellers, threads and screws on hot-steam valves and fittings in hot-steam installations. A fine film of Performance CP on all moving parts of disc brakes provides long-term relief from irritating squealing and whistling noises. Also, extremely suitable for slow-turning, highly loaded plain bearings and door hinges on passenger cars.

Below is an overview of industries where Performance CP #63 plays an important role. Each sector has its own specific demands and challenges. With its reliability and versatility, Performance CP #63 supports operations and helps improve efficiency.

Select a sector to discover products tailored to that industry, or visit our Industries page for a comprehensive overview.

For detailed information about this product, including its applications and specifications, download the TDS.

Available packaging

  • Productcode
    Articlecode
    Productname
    Unit
  • 267801301
    594346
    Performance CP #63
    CRT 12x400ml

    Contact form





    Contact one of our specialists!

    Other products of interest

    Weld-Max A #73
    MIG/MAG Anti splatter nozzle coating
    Industrial Spray Cans
    Go to Product
    Weld-Max A #73 | Spraycans
    Weld-Max A #73
    MIG/MAG Anti splatter nozzle coating
    This product is a dispersion of colloidal hexagonal boron nitride in a blend of organic solvents in a spray can. It serves as a rapid drying ceramic coating providing exceptional protection lubrication and release properties. The high temperature h-boron nitride barrier prevents molten metal such as weld spatter adhering to equipment and consumables or to
    Performance Zinc Spray #72
    Zinc protection coating spray
    Industrial Spray Cans
    Go to Product
    Performance Zinc Spray #72 | Spraycans
    Performance Zinc Spray #72
    Zinc protection coating spray
    This product is a high quality zinc spray to treat galvanized and untreated steel. Performance Zinc Spray is used as a rust and corrosion protection on iron and steel surfaces.
    Performance X3 #74
    High performance problem solver
    Industrial Spray Cans
    Go to Product
    Performance X3 #74 | Spraycans
    Performance X3 #74
    High performance problem solver
    This product is a multifunctional lubricant for demanding conditions. Performance X3 utilises a blend of synthetic fluids to transport a synergistic blend of ceramic reinforced PTFE to critical bearing surfaces protecting them from wear and corrosion. This advanced technology produces an extreme performance lubricant and its cost effectiveness results in saving time and money by
    Performance WD #71
    Universal lubricant & creeping oil
    Industrial Spray Cans
    Go to Product
    Performance WD #71 | Spraycans
    Performance WD #71
    Universal lubricant & creeping oil
    This product is a direct jet-spray to be used as a universal oil to lubricate and protect metal and plastic parts. It is suitable to unfasten rusted nuts and bolts, remove/ avoid squeaking/creaking noises, grease and lubricate runners, joints, hinges and chains. This is a typical 5-in-1 product, acting as a rust remover, lubricant, contact
    Performance UCF #70
    Universal cutting drilling & tapping fluid
    Industrial Spray Cans
    Go to Product
    Performance UCF #70 | Spraycans
    Performance UCF #70
    Universal cutting drilling & tapping fluid
    This product is an universal economic quality oil to prevent over-heating and wear of tools and metals used in applications for in cutting, tapping and drilling activities.
    Performance TFD #69
    Semi dry lubricant containing PTFE
    Industrial Spray Cans
    Go to Product
    Performance TFD #69 | Spraycans
    Performance TFD #69
    Semi dry lubricant containing PTFE
    This product is a waxy PTFE based lubricant. Performance TFD is designed for repetitive movement applications. Moving parts last longer, work harder and need less maintenance when coated with Performance TFD at a wide temperature range of -20 to 120°C and incidental peak temperatures of 150°C.
    Performance Silicon #68
    Industrial silicon fluid
    Industrial Spray Cans
    Go to Product
    Performance Silicon #68 | Spraycans
    Performance Silicon #68
    Industrial silicon fluid
    This product is a phenyl-based silicone for a wide range of applications and uses. These silicones possess high oxidative and thermal stability and are very resistant to shear thanks to their formulation. At higher temperatures, methyl phenyl fluids are more stable and resistant to thermal degradation and oxidation. Because this, the product can be used
    Performance WDM #67
    Universal lubricant & creeping oil with solids
    Industrial Spray Cans
    Go to Product
    Performance WDM #67 | Spraycans
    Performance WDM #67
    Universal lubricant & creeping oil with solids
    This product is a high quality, effective tool for releasing rusted parts.
    Performance Release NS #66
    Silicone free mould release fluid
    Industrial Spray Cans
    Go to Product
    Performance Release NS #66 | Spraycans
    Performance Release NS #66
    Silicone free mould release fluid
    This product is an anti release agent of very high standard for plastic injection molding and thermo-plastic industries for deposit free lubrication of ejector pins. This unique product allows easy release of all thermo-plastic materials from the mold and less wasted parts due to deformity. Because Performance Release NS is completely free of silicones plastic
    Performance OG-XL #65
    Open gear and wire rope grease
    Industrial Spray Cans
    Go to Product
    Performance OG-XL #65 | Spraycans
    Performance OG-XL #65
    Open gear and wire rope grease
    This product is a specially formulated grease for open gears, chains, cables and wire ropes. It contains a high amount of solid lubricants (graphite) which provide excellent anti wear properties under the most severe circumstances. Shock loads, lack of hydrodynamic lubrication can easily be handled.